The following technical papers concerning Attritor mills and our other grinding and dispersing equipment are in PDF format.
Technical Papers
- Attritor Grinding and Dispersing Equipment?– Presented at Kent State University, Department of Rheology, Seminar on Dispersions of Pigments and Resins in Fluid Media, updated January 2019, Kent, Ohio
- Attrition Dry Milling In Continuous And Batch Modes?– Presented at the Powder & Bulk Solids Conference/Exhibition, updated June 2019, Chicago, Illinois
- Choose the Right Grinding Mill?– As seen in Chemical Processing.
- Media Milling Advances?– As seen in Ceramic Industry.
- Mechanocatalysis for Biomass-Derived Chemicals & Fuels?– As seen in Green Chemistry
- Simultaneous Mechanical and Heat Activation?– Presented at Arizona State University Center for Solid State Science and Science and Engineering of Materials Graduate Program
Attritor Grinding In General – Papers Presented by Union Process
- Effect of Si3N4 Addition on the Morphological and Structural Properties of the 316L Stainless Steel for Nuclear Applications?– As seen in Resolution and Discovery.
- Fine Grinding of High-Value-Added Industrial Minerals by Attrition Milling?– Presented at Les Mineraux Industriels Materiaux de Annees 90, March 1989, Quebec, Canada
- The Fine Grinding of Ceramics with Attritors?– Presented at the Shanghai Symposium/ Exhibition on New Ceramics, April 1991, Shanghai, China
- Attrition Mill Fine Grinding of Advanced Ceramic Powders?– Presented at the Advanced Ceramics Conference, Cincinnati, Ohio, February 1986
- Stirred Ball Mills?– Presented at Clemson University, College of Engineering, Clemson, South Carolina, February 1990
- Attritor Mills & Media for Chocolate Processing Update?– Presented at the Pennsylvania Manufacturing Confectioners’ Assoc., Hershey, Pennsylvania, April 1986
- The Processing of Tungsten Carbide Powder with the Q (Circulation) Attritor?– Presented at the American Society for Metals Conference, Pittsburgh, Pennsylvania, December 1984
- Attrition Mill Grinding of Refractories?– Presented at the Ceramic Manufacturers’ and Suppliers’ Workshop, Louisville, Kentucky, September 1994
- Attritor and Ferrite Grinding Applications?– Presented to the Materials Research Laboratories, Taiwan, ROC, November 1994
- Versatility of Attrition Milling (Wet or Dry Process)?– Presented at Pennsylvania State University, State College, Pennsylvania, June 1995
- Attritor Grinding Mills and New Developments?– Presented at the Toronto Society for Coatings Technology, April 1997
- Small Media Milling in Continuous or Circulation Mode?– Presented at the International Coatings Exposition (formerly Paint Show), October 15, 1998
- Attritors and Thermal Spray Powder Applications?– Presented at the Thermal Spray Symposium, Cincinnati, Ohio November 1999
- Attritors and Ball Mills – How They Work?– Presented at the Philadelphia Training Conference, May 2000 and FSCT St. Louis Symposium, June 1, 2005
- Attritor Grinding Mills and New Developments?– Presented at the Western Coatings Federation, April 2000 and International Coatings Exposition (ICE 2000), October 2000
- Media Milling for Chemical Applications?– Presented at the Chemical Industries Expo, New York, October 2001
- Advances in Small Media Milling?– Presented at the Western Coatings Federation Dinner Meetings, January 2005 and CSCT “Sink or Swim” Conference – Akron University, Akron, Ohio, May 23, 2005
Attritors Used for Testing and Research
- Structural Properties Of Nano- Steel Powders?Prepared By Powder Metallurgy
- Preparation Of Nano-oxide Dispersed Steel Powders?By Powder Metallurgy
- Degassing Behavior of Nanostructured Al and Its Composites
- Nano-hydroxyapatite Preparation from Biogenic Raw Materials
- The Effect of Milling Time on the Sintering Kinetics of Si3n4 Based Nanocomposites
- Preparation Aand Characterization of Hydroxyapatite?from Eggshell
- Size Effects in Micro- and Nanocarbon added C/SI3N4 Composite?Prepared by Hot Pressing
- Mechanical Alloying?– by J.S. Benjamin
- Enhanced Processing of Perovskite Pb(Mg1/3)03 Relaxors Through Understanding the Surface Chemistry of the Component Powders?– by T.R. Shrout, B. Jones, J.V. Biggers and J.H. Adair
- Attritor Milling WC + 6% Co: Effects on Powder Characteristics and Compaction Behaviour?– by S.J. Mashl and D.W. Smith
- Energy Input Monitoring During Attritor Milling?– by R. Goodson, F. Larson, L. Sheehan
- Correlating WC Grain Size Analysis Techniques with Attritor Mill Monitoring in Cemented Carbides?– by R. Goodson, L. Sheehanm, F. Larson
- Demonstration of SiN Attritor Mill?– by Dr. Herbel
- Dissolution of Activated Titanium Slag in Dilute Sulfuric Acid?– F. Habashi
- Activation of Titanium Slag by Attrition Grinding?– F. Habashi
- Grinding Kinetics and Media Wear During Attrition Milling?– by Sheila Padden & James Reed, Alfred University
- Processing of Mechanically Alloyed Amorphous Co85Zr15?– by H. Kimura, M. Kimura, T. Ban
- Development of an Extremely High Energy Ball Mill for Solid State Amorphizing Transformations?– by H. Kimura, M. Kimura, F. Takada
- Micronized High Purity Alumina?– by J.L. Sepulveda, P. Cortesi, A. Ramirez
- Research and Development Report: Production of Fine Particulate Ultra High Molecular Weight Poly(ethylene) for Biological Response Studies?– H.D. Leigh, P. Taylor, A. Swaney, J. Black, Clemson Univ. 1992
- Milling Dynamics: Attritor Dynamics: Results of a Cinematographic Study?– R.W. Rydin, D. Maurice,T.H. Courtney, University of Delaware 1992
- Size Effects in Micro- and Nanocarbon added C/Si3N4 Composite Prepared by Hot Pressing?– C.S.Balázsi, F.S. Cinar, I. Addemir, Zs. Kasztovszky, Zs. K?vér, F. Wéber, Hungarian Academy of Sciences, 2005
Articles Written about Attritors & Bead Mills in Industry
- Influence of Graphene and Graphene Oxide on Properties of Spark Plasma Sintered Si3N4 Ceramic Matrix– by MDPI “Ceramics” 2020
- Grinding Glazes: A Comparison of Milling Methods?– by Southern Devices “Ceramic Industry” October 1993
- High Speed Stirred Ball Mills Save Mineral Supplier Money?– by The Milwhite Co., “Powder and Bulk Engineering, December 1993
- Expanding Into New Markets?… – Hall Chemical, “Powder and Bulk Engineering, January 1989
- Stirred Ball Mill Technology Boosts Process Efficiency?– NCR, “Chemical Processing”, June 1992
- Opening New Doors in Advanced Ceramics?– Diamonite “Ceramic Industry”, November 1992
- Achieving Process Control Through Improved Grinding Techniques for Ferrite Materials?– Jeff Bruce, Steward Inc. presented to The American Ceramic Society, June 1994
- Supplementary Materials for a High-Temperature Nanostructured Cu-Ta-Li alloy with Complexion-Stabilized Precipitates – B. C. Hornbuckle et al., presented to Science, 2025
